Product Name: Mobile Stone Panel Cart with Straps SD910
Product description: SD910 mobile stone panel cart with four rubber-lined contact bars, two ratchet straps, a fold-down tow handle and four casters with brake levers. Frame size and colour customised to your panels.
Product details
Mobile Stone Panel Cart with Straps SD910Moving a slab from the storage rack to the bench is usually the part that needs two people. The SD910 is built for that short trip: four casters carry the weight, a fold-down handle at the centre of the frame gives you somewhere to pull, and ratchet straps keep the panel from shifting as the cart turns.
The frame is welded steel with a green powder coat. Four horizontal bars cross the uprights at different heights, each covered in black rubber where a panel can touch it. Along the bottom edge, black pads sit on the deck so the slab never rests directly on painted steel.
Key Features
1. Centre Tow Handle
A silver handle stands at the middle of the base on a pivot bracket. Fold it up to pull the cart, fold it down to load panels from the front. Because it sits on the centre line, the cart tracks straight instead of swinging to one side.
2. Ratchet Straps
Two green ratchet straps run over the panel and hook into the base. Tension is applied at the ratchet, so one person can secure a panel without holding it and pulling at the same time.
3. Four Contact Bars
Black rubber-lined bars at four heights give the panel more than one contact point. Bar positions are set to the panel height you handle, so a tall sheet does not pivot on a single lower rail.
4. Rubber Base Pads
Pads along the deck define where the bottom edge sits and keep it off the steel. Their spacing is matched to the slab width.
5. Casters with Brakes
The cart rolls on four casters, with brake levers shown on the near-side wheels in the photos. Set the brakes before strapping a panel or leaving the cart parked.
6. Built to Your Panel
Frame width, bar positions, pad layout and colour are all made to order. The cart is specified from the panel length, width, thickness and weight.
Applications
Suitable for stone fabrication workshops, slab warehouses, showrooms and indoor installation sites. Use it to bring a single panel from storage to the bench, to stage material before cutting, or to move sample panels between display areas.
For marble, granite, quartz, sintered stone or glass panels, please provide the panel length, width, thickness, weight per piece and planned quantity, plus aisle width, door width and floor condition along the route, so the frame size, contact-bar layout and strap arrangement can be confirmed.
Product Specifications

Customization and Quotation
Send us the panel measurements, weight per piece, the route the cart has to take and any door or aisle limits. We will confirm the frame dimensions, bar and pad positions, strap layout and the final quotation. Custom colours and customer logos are available on request.





